GIGABYTE PHASER 4500 - Manual (Page 78)

- 72 - GA-7VAX/GA-7VAXP Motherboard
English
D. How to use Q-Flash Flash?
F3: Load Default F5: Start BIOS Recovery
Load current BIOS default value. Press F5 to recovery new BIOS version.
F7: Save and Restart F9: Exit Without Saving
Save revised setting and restart the Exit without changing.
computer.
F8: Update BIOS from Disk F10: Recovery from Disk
Update boot-up BIOS. Update another BIOS (different from boot-up
BIOS)
C. What is Q-Flash Utility?
Q-Flash utility is a pre-O.S. BIOS flash utility enables users to update its BIOS within BIOS
mode, no more fooling around any OS.
DualBIOS TM Technology FAQ
GIGA BYTE Technology is pleased to introduce DualBIOS technology, a hot spare for your
system BIOS. This new est “Value-added” feature, in a long series of innovations from
GIGABY TE, is available on GA-6OXET S eries motherboard. Future GIGAB YTE motherboards
will also incorporate this innovation.
What’s DualBIOS TM ?
On GIGABYTE motherboards w6ith DualBIOS there are physically two BIOS chips. For
simplicity we’ll call one your “Main BIOS” and the other we’ll call your “Backup” BIOS (your “hot
spare”). If your Main BIOS fails, the Backup BIOS almost automatically takes over on your next
system boot. Almost automatically and with virtually zero down time! Whether the problem is a
failure in flashing y our BIOS or a virus or a catastrophic failure of the Main BIOS chip, the result
is the same - the Backup BIOS backs you up, almost automatically.