GIGABYTE PHASER 4500 - Manual (Page 43)

BIOS Setup - 37 -
English
.
FUSB 2.0 Controller
MDisable this option if y ou are not using the onboard USB 2.0 feature.
8 Enabled Enabled USB 2.0 Controller. (Default value)
8 Disabled Disabled USB 2.0 Controller.
F US B Keyboard S upport
MWhen a USB key board is installed, please set at Enabled.
8 Enabled Enabled USB Key board Support.
8 Disabled Disabled USB Key board Support. (Default v alue)
F US B Mouse Support
8 Enabled Enabled USB Mouse Support.
8 Disabled Disabled USB Mouse Support. (Default value)
F Onboard H/W LAN *
8 Enable Enabled onboard LAN function.(Default v alue)
8 Disable Disable onboard LAN function.
FOnboard H/W 13 94 *
8 Enable Enabled onboard IEEE 1394 function.(Default v alue)
8 Disable Disabled onboard this function.
F Onboard H/W ATA/RAID *
MIf you don't set any HDD Device in IDE3 or 4 but enable the function, the
normal message 'MBUltra133 BIOS is not installed becasue there are no drives
attached' wil l come out.'
Ignore this message or set the option disable to make the message disappear.
8 Enable Enabled onboard ATA/RAID function.(Default v alue)
8 Disable Disabled onboard sound function.
FRAID Controller Function*
8 ATA Enabled ATA function.(Default value)
8 RAID Enabled RAID function.
*FOR GA-7VAXP ONLY