GIGABYTE GN-WM01GT - Manual (Page 28)

25
to an access point. Open and shared authentication do not rely on a RADIUS server on
your network.
Preferred Access Points
If this profile is configured for use in an infrastructure network and you want to specify up
to four access points to which the client adapter should attempt to associate, click
Preferred APs. The Preferred Access Points window appears
Figure 3-14. Preferred Access Points Window
Leave the Access Point 1 through Access Point 4 fields blank or enter the MAC addresses
of up to four preferred access points to which the client adapter can associate; then click
OK. (The MAC address should consist of 12 hexadecimal characters.) If the specified
access points are not found or the client adapter roams out of range, the adapter may
associate to another access point.
Go to the next section to set additional parameters or click OK to save your changes and
return to the Profile Management window.