GIGABYTE GN-WM01GT User Manual
Page 24
21
accept a certificate from any server that supplies a certificate signed by the certificate
authority listed in the Server Properties drop-down list.
Login Name - If the Login Name field is not filled in automatically, enter your username in
this format: [email protected].
Enabling EAP-TTLS
If you want to enable EAP-TTLS without WPA/WPA2, choose 802.1x under Set Security
Options and EAP-TTLS in the 802.1x EAP Type drop-down box.
If you want to enable EAP-TTLS with WPA/WPA2, choose WPA/WPA2 under Set
Security Options and EAP-TTLS in the WPA/WPA2 EAP Type drop-down box.
Figure 3-10. Define EAP-TTLS Configuration
Trusted Root certification Authorities – Choose the certificate authority from which the
server certificate was downloaded in the drop-down list.
User information for EAP-TTLS Authentication - Enter your EAP-TTLS username and
password in the corresponding fields.
Enabling PEAP (EAP-GTC)
If you want to enable PEAP (EAP-GTC) without WPA/WPA2, choose 802.1x under Set
Security Options and PEAP (EAP-GTC) in the 802.1x EAP Type drop-down box.
If you want to enable PEAP (EAP-GTC) with WPA/WPA2, choose WPA/WPA2 under Set
Security Options and PEAP (EAP-GTC) in the WPA/WPA2 EAP Type drop-down box.