GIGABYTE GN-WM01GT - Manual (Page 20)

17
Figure 3-6. Enter WPA Passphrase
Using LEAP
Before you can enable LEAP authentication, your network access point must be
configured for LEAP authentication.
Perform one of the following from the Security Tab:
y If you want to enable LEAP without WPA/WPA2, choose 802.1x under Set
Security Options and LEAP in the 802.1x EAP Type drop-down box.
y If you want to enable LEAP with WPA/WPA2, choose WPA/WPA2 under Set
Security Options and LEAP in the WPA/WPA2 EAP Type drop-down box.
Figure 3-7. LEAP Settings
Use Temporary User Name and Password - Requires you to enter the LEAP username
and password each time the computer reboots in order to authenticate and gain access to