Troubleshooting – Garmin 70 User Manual
Page 43
FR70 Owner’s Manual
41
Appendix
Troubleshooting
Problem
Solution/Answer
The buttons do not
respond. How do I
restart the FR70?
Press and hold
MODE
and
ENTER
simultaneously to
restart the FR70 software. You must reset the time and
your custom settings. If you are still having problems,
remove and then replace the battery (see
How do I clear all
user data?
This procedure deletes all information that you have
entered. Press and hold
MODE
,
LIGHT/
, and
▲
simultaneously. This also restores the factory settings.
Workout data is deleted.
How do I set the
time to AM or PM?
Verify that the time mode is set to
12
(12 hour). Press
▲/▼
to select the correct hour. The
A
or
P
icon
appears below the seconds on the time page. For more
.
The FR70 will not
send data to my
computer.
to enable computer pairing.
The heart rate
monitor or foot pod
will not pair with the
FR70.
• Stay 10 m away from other ANT sensors while
pairing.
• Bring the FR70 within range (3 m) of the heart rate
monitor while pairing.
• If the problem persists, replace the battery.
How do I change
the time?
to set the time.