Using the foot pod (optional) – Garmin 70 User Manual
Page 13
FR70 Owner’s Manual
11
Getting Started
1. Connect one side of the strap to
the heart rate monitor module.
2. Wet both electrodes on the back
of the heart rate monitor strap
to create a strong connection
between your chest and the
transmitter.
Electrodes
Electrodes
3. Wrap the strap around your chest,
and connect the other side.
nOTE: The Garmin logo should
be right‑side up.
4. Bring the FR70 within range (3 m)
of the accessory. Press
MODE
until the training page appears.
TiP: If the heart rate data is erratic
or does not appear, you may have
to tighten the strap on your chest
or warm up for 5‑10 minutes.
Using the Foot Pod
(Optional)
The foot pod is on standby and ready
to send data as soon as you install it
or start moving.
TiP: Before pairing, walk 4‑5
steps with the foot pod so it will
begin transmitting speed data to
your watch.
Installing the Foot Pod on
Your Shoe Laces
1. Press the tab on the lace clip. Lift
and separate the foot pod from
the lace clip.
2. Loosen your shoe laces.