Sending workout data to your computer, Using the heart rate monitor, Sending workout data to your – Garmin 70 User Manual
Page 12: Computer
10
FR70 Owner’s Manual
Getting Started
Sending Workout Data to
Your Computer
nOTE: You must download
software (
) so that the
necessary USB drivers are
installed before connecting the
USB ANT Stick to your computer.
1. Plug the USB ANT Stick into
an available USB port on your
computer.
2. Bring your FR70 within range
(5 m) of your computer.
nOTE: If Power Save Transfer is
activated, your FR70 must be in
regular time mode to transfer data
to your computer. See
3. Follow the on-screen instructions.
Using the Heart Rate
Monitor
CAUTION
The heart rate monitor may cause
chafing when used for long periods
of time. To alleviate this issue, apply
an anti‑friction lubricant or gel to
the center of the hard strap where it
contacts your skin.
Do not use gels or lubricants that
contain sunscreen. Do not apply
anti‑friction gel or lubricant on the
electrodes.
nOTE: Your device may include
either a hard strap monitor or a soft
strap monitor.
The heart rate monitor is on standby
and ready to send data. Wear the
heart rate monitor directly on your
skin, just below your breastplate.
It should be snug enough to stay in
place during your run.