Garmin 70 - Manual (Page 10)

8 FR70 Owner’s Manual
Getting Started
Pairing Sensors
The ANT+ ™ Heart Rate Monitor
sensor included with your watch is
already paired. Press MODE until
training mode appears.
The
icon appears on the FR70
screen when the sensor is paired.
If you purchased a sensor (with
ANT+ wireless technology)
separately, you need to pair it with
your FR70.
After you pair the first time, your
FR70 automatically recognizes your
sensor each time it is activated. This
process occurs automatically when
you turn on the FR70 and only takes
a few seconds when the sensors are
activated and functioning correctly.
When paired, your FR70 only
receives data from your sensor, and
you can go near other sensors.
Pairing Additional
Accessories
1. Move away (10 m) from other
sensors while the FR70 is trying
to pair with your sensor for the
first time. Bring your sensor within
range (3 m) of the FR70.
2. Press MODE > SETTINGS >
SPORT .
3. Select RUN , GENERAL , or
BIKE > HEART RATE , FOOT
POD , or BIKE SENSOR > ON .
nOTE: When pairing the foot
pod, make sure rUn is selected.
4. While the FR70 scans for new
sensors, the , , and
icons blink. The icons are solid
when paired.
TiP: The accessory needs to
send data to complete the pairing
process. You need to wear the
heart rate monitor, take a few steps
wearing the foot pod, or pedal your
bike with the GSC 10.