Grindmaster SHUTTLE BREWER APBVSA-430V2E230 - Manual (Page 10)

Page 10 Shuttle Brewers & Airpot/Shuttle Brewers
Programming (cont.)
13) By-PASS (Set bypass volume): Choose OFF to 25%
Set the amount of bypass desired during brew. If none is desired
then set to OFF, otherwise, set the % of brew volume to bypass.
14) CoPY-to-LEFt: Choose YES or no
If the same program parameters are desired on same portion size
on the left side, then choose YES and the parameters will
be copied.
The sequence of programming for the Medium portion is as follows: (refer to Table 2)
1) Br time (Brew time): Choose 0:01 - 6:00 minutes
2) PrE inFuSion: Choose OFF to 2:00 minutes
3) PrE inFuSion oFF: Choose 0:05 to 2:00 minutes
4) PuLSE br (Pulse Brewing): Choose OFF to 10
5) PuLSE on (Pulse ON time): Choose 0:05 - 2:00 minutes
6) PuLSE oFF (Pulse OFF time): Choose 0:05 - 2:00 minutes
7) By-PASS (Set bypass volume): Choose OFF - 25%
8) CoPY-to-LEFt: Choose YES or no
The sequence of programming for the Small portion is as follows: (refer to Table 3)
1) Br time (Brew time): Choose 0:01 - 6:00 minutes
2) PrE inFuSion: Choose OFF to 2:00 minutes
3) PrE inFuSion oFF: Choose 0:05 to 2:00 minutes
4) PuLSE br (Pulse Brewing): Choose OFF to 10
5) PuLSE on (Pulse ON time): Choose 0:05 - 2:00 minutes
6) PuLSE oFF (Pulse OFF time): Choose 0:05 - 2:00 minutes
7) CoPY-to-LEFt: Choose YES or no