8 pc health status, Reset case open status, Case opened – GIGABYTE LGA775 Socket Motherboard for Intel GA-73PVM-S2H User Manual
Page 50: Current system/cpu temperature, Current cpu/system fan speed (rpm), Cpu warning temperature, Cpu/system fan fail warning
GA-73PVM-S2H Motherboard
- 50 -
2-8
PC Health Status
Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of
previous chassis intrusion status and the Case Opened field will show "No" at next boot. (Default:
Disabled)
Case Opened
Displays the detection status of the chassis intrusion detection device attached to the motherboard
CI header. If the system chassis cover is removed, this field will show "Yes", otherwise it will
show "No". To clear the chassis intrusion status record, set Reset Case Open Status to Enabled,
save the settings to CMOS, and then restart your system.
Current Voltage(V) Vcore/DDR2 1.8V/+3.3V/+12V
Displays the current system voltages.
Current System/CPU Temperature
Displays current system/CPU temperature.
Current CPU/SYSTEM FAN Speed (RPM)
Displays current CPU/system fan speed.
CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold,
BIOS will emit warning sound. Options are: Disabled (default), 60
o
C/140
o
F, 70
o
C/158
o
F, 80
o
C/
176
o
F, 90
o
C/194
o
F.
CPU/SYSTEM FAN Fail Warning
Allows the system to emit warning sound if the CPU/system fan is not connected or fails. Check
the fan condition or fan connection when this occurs. (Default: Disabled)
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
PC Health Status
Reset Case Open Status
[Disabled]
Case Opened
Yes
Vcore
1.330V
DDR2 1.8V
1.840V
+3.3V
3.360V
+12V
12.112V
Current System Temperature
39
o
C
Current CPU Temperature
37
o
C
Current CPU FAN Speed
3245 RPM
Current SYSTEM FAN Speed
0 RPM
CPU Warning Temperature
[Disabled]
CPU FAN Fail Warning
[Disabled]
SYSTEM FAN Fail Warning
[Disabled]
CPU Smart FAN Control
[Enabled]
CPU Smart FAN Mode
[Auto]
System Smart FAN Control
[Enabled]
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level`