Gateway E-4400 - Manual (Page 46)

Adding or replacing memory 39
To add or remove RIMMs:
1 Turn off the system and disconnect the power cord, modem cord (if
installed), and all external peripheral devices.
2 Open the case (see “Opening the case” on page 17), observing the “Static
electricity precautions” on page 15.
RIMM Modules (64 Mb
RDRAMs) Number of Devices Total
Memory
One 64 MB Non-ECC RIMM
One CRIMM 8 (1 RIMM with 8 devices) 64 MB
Two 64 MB Non-ECC RIMMs 16 (2 RIMMs with 8 devices each) 128 MB
One 64 MB Non-ECC RIMM
One 128 MB Non-ECC RIMM 24 (1 RIMM with 8 devices and 1
RIMM with 16 devices) 192 MB
Two 128 MB Non-ECC RIMMs 32 (2 RIMMs with 16 devices) 256 MB
RIMM Modules (128 Mb
RDRAMs) Number of Devices Total
Memory
One 64 MB Non-ECC RIMM
One CRIMM 4 (1 RIMM with 4 devices) 64 MB
Two 64 MB Non-ECC RIMMs 8 (2 RIMMs with 4 devices each) 128 MB
One 64 MB Non-ECC RIMM
One 128 MB Non-ECC RIMM 12 (1 RIMM with 4 devices and 1
RIMM with 8 devices) 192 MB
Two 128 MB Non-ECC RIMMs 16 (2 RIMMs with 8 devices each) 256 MB
One 128 MB Non-ECC RIMM
One 256 MB Non-ECC RIMM 24 (1 RIMMs with 8 devices and 1
RIMM with 16 devices) 384 MB
Two 256 MB Non-ECC RIMMs 32 (2 RIMMs with 16 devices each) 512 MB
RIMM Modules (256 Mb
RDRAMs) Number of Devices Total
Memory
One 256 MB Non-ECC RIMM
One 512 MB Non-ECC RIMM 24 (1 RIMM with 8 devices and
1 RIMM with 16 devices) 768 MB
Two 512 MB Non-ECC RIMMs 32 (2 RIMMs with 16 devices each) 1 GB