Graco Inc. 309388 - Manual (Page 12)

12 309388
5. Point In–line Valve into waste pail.
Priming
– For flushing water and loading pump and hose with paint
6. Turn power switch ON.
7. When paint starts to come out of prime tube,
pull and hold In–line Valve trigger and turn
Spray/Prime valve to spray. When paint
comes out of In–line Valve release trigger.
NOTE: The motor stopping indicates the
pump and hose are primed with paint.
8. Transfer prime tube to paint pail.
paint
PAINT
WASTE
WASTE
Release trigger
SPRAY