Gold's Gym XRT 75 GGSY69320 - Manual (Page 15)

15
28. Wrap the Dip Cable (74) over a 90mm Pulley
(78). Attach the Pulley to the Top Frame (6) with
an M10 x 45mm Bolt (93) and an M10 Nylon
Locknut (87).
30. Wrap the Dip Cable (74) under a 90mm Pulley
(78). Attach the Pulley and a Cable Trap (68)
between the second set of holes from the top of
the Pulley Plates (63) with an M10 x 50mm Bolt
(100) and an M10 Nylon Locknut (87). Make sure
that the Cable Trap is turned to hold the Cable
in place.
31. Wrap the Dip Cable (74) over a 90mm Pulley
(78). Attach the Pulley to the first bracket on the
right side of the Butterfly Top Frame (7) with an
M10 x 45mm Bolt (93) and an M10 Nylon Locknut
(87).
29. Wrap the Dip Cable (74) over a 90mm Pulley
(78). Attach the Pulley to the Butterfly Top Frame
(7) with an M10 x 45mm Bolt (93) and an M10
Nylon Locknut (87).
28
29
30
31
78
87
6
7
74
78
78
63
87
100
93
87
74
68
74
7
78 93
87
93
74