Gold's Gym GGCCBE8057.0 - Manual (Page 19)

19
32. Tighten three Weight Storage Tubes (67) onto a
Rear Upright (12).
Attach the remaining three Weight Storage
Tubes (not shown) onto the other Rear
Upright (12) in the same way.
12
12
67
67
67
33. Attach an Upright Pin/Tether (28) to a Weight
Rest (26) with an M4 x 16mm Self-tapping Screw
(147). Hold the Weight Rest against one of the
Front Uprights (11), and fully insert the Upright
Pin into the Weight Rest and into one of the holes
in the Front Upright.
Do not overtighten the
Screw; the Tether must rotate easily.
Attach an Upright Pin/Tether (28) to a Weight
Spotter (29) with an M4 x 16mm Self-tapping
Screw (147). Hold the Weight Spotter against the
Front Upright (11), and fully insert the Upright Pin
into the Weight Spotter and into one of the holes
in the Front Upright.
Attach the other Weight Rest (not shown) and
the other Weight Spotter (not shown) to the
other Front Upright (not shown) in the same
way.
33
29
26
11
28
28
147
32
147