Grizzly 12" Jointer w/spiral cutterhead manual insert g0609X - Manual (Page 12)

g3640—power twist ® v-belt - 1 ⁄
2
" x 48"
Smooth running with less vibration and noise
than solid belts. the power twist
® v-belt can be
customized in minutes to any size—just add or
remove sections to fit your needs. Size:
1 ⁄
2
" x 48";
replaces all "a" sized v-belts. requires two power
twist
® v-belts to replace the stock v-belt on the
Model g0609X.
figure 2. g3640 power twist ® v-Belt.
g0609X accessories
h9291—12" byrd ® shelix cutterhead
Made in the uSa by Byrd, this indexable carbide
insert cutterhead is the best money can buy—
period! the inserts are not only placed in a spiral
pattern, they are also positioned at an angle so
the shearing action leaves a glassy smooth cut on
the toughest and most figured woods. Comes with
5 extra replacement inserts. very nice upgrade!
figure 3. Byrd Shelix Cutterhead.
h7319—10 pk. of carbide inserts 14x14x2mm
h1411—powerhands ™ safety stick
this safety push stick features interchangeable
traction treads; one for flat stock, and one for
pressing against table and fence. it also has a
spring loaded push-pin for full workpiece contact.
Made in the uSa.
figure 4. h1411 powerhands ™ Safety Stick.
g5562—slipit ® 1 Qt. gel
g5563—slipit ® 12 oz spray
g2871—boeshield ® t-9 12 oz spray
g2870—boeshield ® t-9 4 oz spray
h3788—g96 ® gun treatment 12 oz spray
h3789—g96 ® gun treatment 4.5 oz spray
figure 5 . recommended products for protecting
unpainted cast iron/steel parts on machinery.