GE EER4001 - Manual (Page 11)

Safety Instructions
Operating Instructions
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
11
ge.com
Oven Control, Clock and Timer Features and Settings
Automatic Oven Light (on some models)
This lights anytime the oven has been
programmed using the Cooking Time or
Start Time functions.
Oven Light On/Off Pad
Touch this pad to turn the oven light on
or off.
– Pad
Short taps to this pad will decrease the time
or temperature by small amounts. Touch
and hold the pad to decrease the time or
temperature by larger amounts.
+ Pad
Short taps to this pad will increase the time
or temperature by small amounts. Touch
and hold the pad to increase the time or
temperature by larger amounts.
Self Clean Pad
Touch this pad to select the self-cleaning
function. See the Using the self-cleaning
oven section.
Self Clean Light
Flashes while in edit mode—you can change
the length of time for the self-clean cycle at
this point. Glows when the oven is in the self-
clean cycle. After the self-clean cycle, the light
will turn off. Unlatch the door.
Clear/Off Pad
Touch this pad to cancel ALL oven
operations except the clock and timer.
Broil Hi/Lo Pad
Touch this pad to select the broil function.
Broil Light
Flashes while in edit mode—you can switch
from Hi to Lo Broil at this point. Glows when
the oven is in broil mode.
Indicator Lights (on some pads)
EDIT mode lasts several seconds after the last
pad press. Start Time On/Off and Cooking Time
On/Off will be the only pads lit if either
of these options is selected. (Example: Start
Time is selected with Bake—the Start Time pad
will remain lit until the clock reaches the
programmed time, at which point it will turn
off and the Bake/Temp Recall pad light will
light up.)
Power Outage
If a flashing time is in the display, you have experienced a
power failure. Reset the clock. To reset the clock, touch the Clock pad. Enter the
correct time of day by touching the + or – pads.
Touch the Start/On pad.