GE GXFM07HBL - Manual (Page 5)

State of California
Department of Public Health
Water Treatment Device
Certificate Number
Date Issued: March 17, 2008
Trademark/Model Designation Replacement Elements
1894 08 -
H L M X F L B H 7 0 M F X G
H L M X F W W H 7 0 M F X G
Manufacturer: General Electric Company
The water treatment device(s) listed on this certificate have met the testing requirements pursuant to Section
116830 of the Health and Safety Code for the following health related contaminants:
d a e L s t s y C
Mercury
Benzene
Carbofuran
Lindane
P-Dichlorobenzene
Toxaphene
Microbiological Contaminants and Turbidity Inorganic/Radiological Contaminants
Organic Contaminants
Do not use where water is microbiologically unsafe or with water of unknown quality, except that systems certified
for cyst reduction may be used on disinfected waters that may contain filterable cysts.
75 gals Rated Service Capacity: 0.6 gpm Rated Service Flow:
Conditions of Certification:
Installation Instructions
5
CLEANING THE SYSTEM
Use a damp cloth and mild soap for cleaning. Do not
use harsh chemicals, detergents, abrasives, solvents
or cleaning fluids, since they will damage the filtration
system.
REPLACEMENT FILTER CARTRIDGES/
ESTIMATED REPLACEMENT COSTS
FXMLH—Replacement filter cartridge $28–$33
For replacement parts, call toll-free 800.626.2002 (U.S.),
800.663.6060 (Canada-English), 800.361.3869
(Canada-French).
Iowa Residents Only:
_________________________________________________________
Store or Seller’s name
_________________________________________________________
Address
_________________________________________________________
City
State Zip
_________________________________________________________
Telephone
_________________________________________________________
Seller’s signature
_________________________________________________________
Customer’s signature
Date
Problem Possible Causes What To Do
Faucet leaking Missing gasket in tightening nut. • Use Teflon Tape on faucet threads.
Swivel collar not tight enough. • Tighten the swivel collar.
Gasket not seated in the swivel • Make sure gasket is seated in the swivel collar, then tighten the
collar. swivel collar.
Filter cartridge housing Missing O-ring on replacement • Return to the store.
fits loosely to the base filter.
Can not tighten the filter Extra O-ring in housing. • Remove the O-ring from the housing (not from the filter).
cartridge
TROUBLESHOOTING TIPS