Gateway E4350 User Manual
Page 55
49
www.gateway.com
Installing memory
4
Align the notches on the new DIMM with the notches on the memory module bank
and press the module firmly into the bank. The tabs on the sides of the memory
module should secure the memory module automatically. When the module is secure,
you hear a click.
5
Close the case by following the instructions in
6
Reconnect the cables and the power cord.
7
Turn on your computer. Windows starts and the Windows desktop appears.
8
Click
Start
,
Control Panel
, then click
Performance and Maintenance
(if in Category view).
Click/Double-click
System
. The amount of memory in your computer is shown at the
bottom of the System Properties dialog box in the General tab.