Gateway ProfileTM 5 - Manual (Page 86)

78
Chapter 6: Using Multimedia
www.gateway.com
To insert a CD or DVD:
1
Press the eject button on the CD or DVD drive. After the tray opens slightly,
pull the disc tray completely open.
2
Place the disc in the tray with the label facing up, then press down carefully
on the disc until it snaps into place. You can place your other hand
underneath the disc tray to support it while you press the disc into place.
3
Gently push the tray in until it is closed.
Important When you place a single-sided disc in the tray, make sure
that the label side is facing up. If the disc has two playable
sides, place the disc so the name of the side you want to
play is facing up.