Grizzly G0710 - Manual (Page 22)

-20-
Model g0710/g0710p (Mfg. since 11/11)
section 4: operations
NOTICE
if you have never used this type of machine
or equipment before, We strongly rec-
ommend that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. regardless of the con-
tent in this section, grizzly industrial will
not be held liable for accidents caused by
lack of training.
general
operating your Model g0710/g0710p is simple
and straightforward. position the machine near
the dust collector where it will not interfere with
the workpiece being processed, connect the duct,
connect the ducting ground and you are ready to
begin.
Keep in mind that the dust collector is intended for
single machine use and is not designed to draw
dust through long runs and multiple ports simul-
taneously. We do not recommend using ducting
longer than 10 feet. otherwise, dust collection
efficiency will be greatly reduced.
damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. always wear safety glasses and
a respirator when operating this machine.
to reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
do not put hands or
small objects near inlet
openings during opera-
tion. objects sucked
into the inlet will hit the
impeller blade. failure to
heed this warning could
result in personal injury
or property damage.
When the dust collector is not in use, unplug the
power cord from the power source. place the
cord away from potential damage sources, such
as high traffic areas, sharp objects, heat sources,
harsh chemicals, water, damp areas, etc.
machine storage