Grizzly G0710 - Manual (Page 19)

Model g0710/g0710p (Mfg. since 11/11)
-17-
dust collection
since each machine produces a different amount
of sawdust, the requirements for the minimum
amount of CFM to move that sawdust is unique
to the machine (for example, a planer produces
more sawdust than a table saw). Knowing this
required CFM is important to gauging which size
of duct to use.
Based on the dust port size of the machine to be
connected to the dust collector,
figure 14 will give
you a close estimation of the CFM that is reduced
because of dust port size. a machine that gener-
ates large wood chips should be placed as close
to the dust collector as possible.
figure 14. approximate CFM reduction, based
on machine dust port size.
machine
dust port size
approximate
required cfm
2" 98
2.5" 150
3" 220
4" 395
5" 614
6" 884
7" 1203
8" 1570
9" 1990
10" 2456
if your machine doesn't have a built in dust port,
use
figure 15 to verify which size of ducting to
install on your machine.
figure 15. typical ducting sizes and port sizes
for various machines.
machine average dust port size
table saw ......................................................4"
Miter/radial-arm saw ....................................2"
jointer (6" and smaller) .................................4"
jointer (8"-12") ...............................................5"
thickness planer (13" and smaller) ...............4"
thickness planer (14"-20") ............................6"
shaper ...........................................................4"
router (mounted to table) ..............................2"
Bandsaw ........................................................4"
lathe ..............................................................4"
disc sander (12" and smaller) .......................2"
disc sander (13-18") ......................................4"
Belt sander (6" and smaller) .........................2"
Belt sander (7"-9") ........................................3"
edge sander (6" x 80" and smaller) ..............4"
edge sander (6" x 80" and larger) ................5"
drum sander (24" and smaller) ...............2 x 4"
drum sander (24" and larger) .................4 x 4"
Widebelt sander (18" and smaller) ................5"
Widebelt sander (24"–37" single head) ..2 x 6"
Widebelt sander (24"_51" double head) .5 x 4"