GMC 2009 Acadia - Manual (Page 243)

Remote Control Buttons O (Power): Press to turn the video
screen on and off.
P (Illumination): Press to turn
the remote control backlight on.
The backlight automatically times out
after seven to ten seconds if no other
button is pressed while the backlight
is on.
v (Title): Press to return the DVD
to the main menu of the DVD. This
function could vary for each disc.
y
(Main Menu): Press to access
the DVD menu. The DVD menu
is different on every DVD. Use the
navigation arrows to move the
cursor around the DVD menu.
After making a selection press
the enter button. This button only
operates when using a DVD.
n , q , p , o (Menu Navigation
Arrows): Use the arrow buttons to
navigate through a menu.
r
(Enter): Press to select
the choice that is highlighted in
any menu.
z (Display Menu): Press to adjust
the brightness, screen display mode
(normal, full, or zoom), and display
the language menu.
q (Return): Press to exit the
current active menu and return to
the previous menu. This button
operates only when the display
menu or a DVD menu is active.
c (Stop): Press to stop playing,
rewinding, or fast forwarding a
DVD. Press twice to return to
the beginning of the DVD.
s (Play/Pause): Press to start
playing a DVD. Press while a
DVD is playing to pause it.
Press again to continue
playing the DVD.
When the DVD is playing,
depending on the radio,
play may be slowed down
by pressing
s then [ .
The DVD continues playing
in a slow play mode.
Instrument Panel 3-121