GMC 2009 Acadia User Manual
Page 233
Using the Delete All Name Tags
Command
The delete all name tags command
deletes all stored phone book name
tags and route name tags for OnStar
(if present).
To use the delete all name tags
command:
1. Press and hold
b g
for
two seconds. The system
responds with “Ready” followed
by a tone.
2. Say “Delete all name tags”.
The system responds with
“You are about to delete all
name tags stored in your
phone directory and your
route destination directory.
Are you sure you want to do
this? Please say yes or no.”
•
Say “Yes” to delete all
name tags.
•
Say “No” to cancel the
function and return to
the main menu.
Making a Call
Calls can be made using the
following commands:
•
Dial
•
Digit Dial
•
Call
•
Re-dial
Using the Dial Command
1. Press and hold
b g
for
two seconds. The system
responds with “Ready” followed
by a tone.
2. Say “Dial”. The system responds
with “Dial using
“Number please” followed by
a tone.
3. Say the entire number without
pausing.
•
If the system recognizes the
number, it responds with
“OK, Dialing” and dials
the number.
•
If the system does not
recognize the number, it
confirms the numbers followed
by a tone. If the number is
correct, say “Yes”. The system
responds with “OK, Dialing”
and dials the number. If the
number is not correct, say
“No”. The system will ask for
the number to be re-entered.
Using the Digit Dial Command
1. Press and hold
b g
for
two seconds. The system
responds with “Ready” followed
by a tone.
2. Say “Digit Dial”. The system
responds with “Digit dial using
first digit to dial” followed by
a tone.
3. Say the digit to be dialed one
at a time. Following each digit, the
system will repeat back the digit it
heard followed by a tone.
Instrument Panel
3-111