Stovax Huntingdon 30 - Manual (Page 6)

6
USER INSTRUCTIONS
ADVICE ON HANDLING AND DISPOSAL OF FIRE CERAMICS
The fuel effect and side panels in this appliance are made
from Refractory Ceramic Fibre (RCF), a material which is
commonly used for this application.
Protective clothing is not required when handling these
articles, but we recommend you follow normal hygiene
rules of not smoking, eating or drinking in the work area
and always wash your hands before eating or drinking.
To ensure that the release of RCF fibres are kept to a
minimum, during installation and servicing a HEPA filtered
vacuum is recommended to remove any dust accumulated
in and around the appliance before and after working on it.
When servicing the appliance it is recommended that the
replaced items are not broken up, but are sealed within
heavy duty polythene bags and labelled as RCF waste.
RCF waste is classed as stable, non-reactive hazardous
waste and may be disposed of at a licensed landfill site.
Excessive exposure to these materials may cause temporary
irritation to eyes, skin and respiratory tract; wash hands
thoroughly after handling the material.
• Put the flame baffle onto the burner and push against the
rear tray lip, Diagram 6
• Place the rear panel against the spacer brackets and slide
it down to sit on the ledge of the flame baffle Diagram 7
• Place the front coal between the heat shield and the
flame baffle so that its ends sit flat against the burner skin,
Diagram 8
AR0360
7
AR0359
6
spacer bracket
flame baffle
burner
flame baffle
6. FUEL BED ARRANGEMENT
• Put five of the round coals on the front between the
fingers of the flame baffle.
• Put two rectangular coals behind the first row and at
either side to touch the reflector panels, Diagram 9
• Place four more round coals behind the first row so they
sit on the fingers, the two at each side touch the rectangular
coals, Diagram 10
• Put the last three round coals behind the centre row and
touching the back panel, Diagram 11
AR0363
10
AR0362
9
AR0361
8