Gefen EXT-COMPAUD-CAT5-444 - Manual (Page 5)

READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 4X4 COMPONENT MATRIX OVER CAT-5
• The extender functionality of the 4x4 Component Matrix Over CAT-5 requires
the use of the supplied 1 foot component video and audio jumper cables.
These cables must be used to connect the component video and audio
output ports to the component video and audio extension input ports.
• IR repeater functionality is only from the receiving unit to the sending unit. IR
data cannot be transmitted from the sending unit to the receiving unit.
• A single CAT cable is needed for each extension. Gefen recommends using
solid core CAT-5e cabling. Termination should adhere to the TIA/EIA-568-B
specifi cation. See page 19 for details.
• The 4x4 Component Matrix over CAT-5 Receiver unit has a Focus EQ
trimpot to compensate for color convergence (color bleeding) or when no
picture is displayed; both of which are caused by variances that can be
found in different CAT-5 cable brands. See page 13 for details.
2
OPERATION NOTES