Gefen EXT-COMPAUD-CAT5-444 - Manual (Page 4)

1
Congratulations on your purchase of the 4x4 Component Matrix Over CAT-5.
Your complete satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
The Gefen 4x4 Component Matrix Over CAT-5
The Gefen 4x4 Component/Audio CAT5 Matrix offers unprecedented fl exibility
and convenience by routing high defi nition video and analog/digital audio
from any of four Component video sources to any of 4 remote displays over
inexpensive, standard CAT-5 cabling.
Each remote display has a control box that allows the viewer to select any of the
4 video sources and control that source via an IR remote control as if the viewer
was standing in the room where the source originates.
Full High-Resolution HDTV signals are supported up to a resolution of 1080p at a
maximum distance of 1000 feet. The Gefen 4x4 Component/Audio CAT5 Matrix
works with any Component video source including DVD players, cable boxes,
and satellite set-top boxes that connect to a Component display. Every source is
accessible at all times by any display by selecting it with the IR remote.
How It Works
You simply connect up to 4 local Component video and analog/digital audio
sources to the Matrix’s inputs. Connect the included 1-foot loop back cables into
the upper board for the CAT-5 extension function. Then run each of your CAT-5
cables from the Matrix to the remote displays. At each remote display, terminate
the CAT-5 cable run with a Component/Audio CAT5 Receiver device. Connect
each Receiver to a display and your analog/digital audio equipment and you’re all
set.
INTRODUCTION