Genie 3681036666 - Manual (Page 9)

9
For Help, call 1-800-35-GENIE or visit www.geniecompany.com
LEARN
CODE
BUTTON
LEARN
INDICATOR
LIGHT
A Install a light bulb (100 Watts or less)(not included) into Light
Socket (Figure 14):
• Rough service, 130 Volt bulbs are recommended .
B Install Lens into slots in Motor Cover .
• Insert Bottom hinges into slots provided in metal front
cover of Power Head .
• Flip Lens up and fasten with molded latches on lens .
i
NStallatioN of
l
eNS aND
b
ulb
Figure 14 Install Lens and Light bulb
Transmitter Compliance Statement
WARNING
TO REDUCE THE RISK OF
SEVERE INjURY OR DEATH
1 READ AND FOLLOW ALL INSTRUCTIONS .
2 Never let children operate or play with the Door
Controls . Keep the Remote Control away from children .
3 Always keep the moving door in sight and away from
people and objects until the door is completely closed .
NO ONE SHOULD CROSS THE PATH OF THE
MOVING DOOR .
4 NEVER GO UNDER A STOPPED, PARTIALLY
OPEN DOOR .
5 Test Opener monthly . The door MUST reverse on
contact with a 1-1/2” high object (or a 2” x 4” board
laid flat) at the center of the doorway on the floor . After
adjusting either the Force or the Limit of travel, retest
the Door Opener . Failure to adjust the Opener properly
may cause severe injury or death .
6 When possible use the Emergency Release only when
the door is closed . Use caution when using this Release
with the door open . Weak or broken springs are capable
of increasing the rate of door closure and increasing the
risk of severe injury or death .
7 KEEP GARAGE DOORS PROPERLY BALANCED . See
Owner’s Manual . An improperly balanced door increases
the risk of severe injury or death . Have a Genie Factory
Authorized Dealer make repairs to cables, spring
assemblies, and other hardware .
8
SAVE THESE INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
N
oteS