Graco MAGNUM 261800 - Manual (Page 35)

Technical Data
312079A 35
Technical Data
Working pressure range 0-2800 psi (0-19 MPa, 0 -193 bar)
Electric motor
6.3 AMP (open frame, universal)
Operating horsepower 3/8
Maximum delivery (with
tip) 0.24 gpm (0.91 lpm)
Paint hose 1/4 in. x 25 ft
(6.4 mm x 7.5 m)
Maximum tip hole size 0.015 in. (0.38 mm)
Weight:
Sprayer only 20 lbs. (9.0 Kg)
Sprayer, hose & gun 23 lbs. (10.5 Kg)
Roller 1 lb. (0.5 Kg)
Dimensions:
Length 22.5 in. (57 cm)
Width 14 in. (35.6 cm)
Height 16.5 in. (41.9 cm)
Power cord 18 AWG, 3-wire, 6 ft (1.8 m)
Fluid inlet fitting 3/4 in. internal thread (standard garden hose thread)
Fluid outlet fitting 1/4 NPSM external thread
Inlet screen 35 mesh (450 micron)
Wetted parts, pump &
hose stainless steel, brass, ultra-high molecular weight polyethylene (UHMWPE),
carbide, nylon, aluminum, PVC, polypropylene, fluroelastomer
Wetted parts, gun SG10: plated steel, nylon, aluminum, tungsten carbide, stainless steel, brass,
fluroelastomer
Generator requirement 1500 Watt minimum
Electrical power
requirement 120VAC, 60 Hz, 1 phase, 15A
Storage temperature
range
◆❖
-30° to 160°F (-35° to 71°C)
Operating temperature
range
✔
40° to 115°F (4° to 46°C)
◆
When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint
freezes in pump.
❖
Damage to plastic parts may result if impact occurs in low temperature conditions.
✔
Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.