GSI Outdoors PNEG-1153 - Manual (Page 6)

6 PNEG-1153 CALC-U-DRI Moisture/Matic/Manager
3. SAFETY DECALS
1. Read and understand the Owner’s Manual.
2. Disconnect all electrical power before servicing or opening control box, adjusting or
lubricating the equipment.
3. All electrical hook-ups should be in accordance to the National Electrical Code.
4. Ground all electrical equipment as well as bin itself.
5. Only knowledgeable and trained personnel should operate this equipment.
6. NEVER WORK WITH BELTS OR AUGERS WITH POWER “ON”...
automatic controls may start without warning! Stay clear of motors, belts and augers.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY
RESULT IN PERSONAL INJURY OR PROPERTY DAMAGE.
BE A SAFE OPERATOR
THE DECAL SHOWN ON THIS PAGE MUST BE DISPLAYED AS SHOWN
REPLACEMENTS ARE AVAILABLE UPON REQUEST
Note:
1.The decal on this page is NOT actual size.
2. Keep all decals wiped clean at all times.
3. All decals must be replaced if they are
destroyed, missing, painted over, or can no
longer be read.
DMC Part Number: 801L010
Contact:
WRITE TO: DMC
1600 12th street N.E
MASON CITY, IA, USA 50401
OR CALL: 641-423-6182