GSI Outdoors PNEG-1153 - Manual (Page 13)

PNEG-1153 CALC-U-DRI Moisture/Matic/Manager 13
4. INSTALLATION
Figure 4K
3. Secure the restrictor spout to the flat bottom with 1/4" hardware. Secure the sensor by
cutting the end off of the strap and mounting with a self-drilling screw to the edge of the flat
spout. Attach the screw end of the clamp on the other side of the flat spout with a
self-drilling screw.
(See Figure 4L). and (See Figure 4M).
Figure 4L
Figure 4M
HOLE CUT-OUT
5-11/16
1-11/16
5/16 DIAM
3-1/2
5-1/2 CL