beautypg.com

Warning, Glass surface—potential for permanent damage – GE JB910 User Manual

Page 37

background image

To order CERAMA BRYTE

®

Ceramic

Cooktop Cleaner and the cooktop
scraper, please call our toll-free number:

National Parts Center

800.626.2002

www.GEAppliances.com

CERAMA BRYTE

®

Ceramic

Cooktop Cleaner . . . . . . . . . . .# WX10X300

CERAMA BRYTE

®

Ceramic

Cooktop Scraper . . . . . . . . . . .# WX10X0302

Kit . . . . . . . . . . . . . . . . . . . . . . . .# WB64X5027
(Kit includes cream and cooktop scraper)

CERAMA BRYTE

®

Cleaning Pads for

Ceramic Cooktops . . . . . . . . .# WX10X350

Sugary spillovers (such as
jellies, fudge, candy, syrups)
or melted plastics can cause
pitting of the surface of your
cooktop (not covered by the
warranty) unless the spill is
removed while still hot.
Special care should be taken
when removing hot
substances.

Be sure to use a new, sharp
razor scraper.

Do not use a dull or nicked
blade.

To Order Parts

To clean the rubber-like seal at the outer
edge of the glass, wipe it with cooktop
cream when needed.

Rubber-like Seal

Metal Marks and Scratches

Be careful not to slide pots and pans
across your cooktop. It will leave
metal markings on the cooktop
surface.

These marks are removable using
the CERAMA BRYTE

®

Ceramic

Cooktop Cleaner with the CERAMA
BRYTE

®

Cleaning Pad for Ceramic

Cooktops.

If pots with a thin overlay of
aluminum or copper are allowed
to boil dry, the overlay may leave
black discoloration on the cooktop.

This should be removed
immediately before heating again
or the discoloration may be
permanent.

WARNING:

Carefully check the

bottom of pans for roughness that would scratch
the cooktop.

www.GEAppliances.com

Damage from Sugary Spills and Melted Plastic

Turn off all surface units. Remove
hot pans.

Wearing an oven mitt:

a.

Use a single-edge razor blade
scraper (CERAMA BRYTE

®

Ceramic Cooktop Scraper) to
move the spill to a cool area on
the cooktop.

b.

Remove the spill with paper
towels.

Any remaining spillover should be
left until the surface of the cooktop
has cooled.

Don’t use the surface units again
until all of the residue has been
completely removed.

NOTE: If pitting or indentation in the glass
surface has already occurred, the cooktop glass
will have to be replaced. In this case, service will
be necessary.

Glass surface—potential for permanent damage

.

Safety Instructions

Operating Instructions

Care and Cleaning

Tr

oubleshooting T

ips

Consumer Support

37