GE JT91530 - Manual (Page 6)

Special features of your oven control.
Your new touch pad control has additional features that you may choose to use. The following are the features
and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain in
the control’s memory until the steps are repeated.
When the display shows your choice, press the START pad. The special features will remain in memory after
a power failure, except for the Sabbath feature, which will have to be reset.
12-Hour Shut-Off
With this feature, should you forget and leave the
oven on, the control will automatically turn off the
oven after 12 hours during baking functions or
after 3 hours during a broil function.
If you wish to turn OFF this feature,
follow the steps below.
Press the BAKE and BROIL HI/LO
pads (on double oven models, use
the upper oven controls) at the same
time for 3 seconds, until the display
shows SF.
Press the DELAY START pad until
no shdn (no shut-off) appears in
the display.
Press the START pad to activate the
no shut-off and leave the control set
in this special features mode.
NOTE: On double oven models, this activates this
special feature for both ovens.
6
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
12-Hour, 24-Hour or Clock Black-Out
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Press the BAKE and BROIL HI/LO
pads (on double oven models, use
the upper oven controls) at the same
time for 3 seconds, until the display
shows SF.
Press the CLOCK pad once. The
display will show 12 hr. If this is
the choice you want, press the
START pad.
Press the CLOCK pad again to
change to the 24-hour military time
clock. The display will show 24 hr.
If this is the choice you want, press
the START pad.
Press the CLOCK pad again to black
out the clock display. The display
will show OFF. If this is the choice
you want, press the START pad.
NOTE: If the clock is in the black-out mode, you
will not be able to use the Delay Start function.
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections, but you may change this
to use the Celsius selections.
Press the BROIL HI/LO and BAKE
pads (on double oven models, use
the upper oven controls) at the same
time for 3 seconds, until the display
shows SF.
Press the COOK TIME and BROIL
HI/LO pads at the same time. The
display will show F (Fahrenheit).
Press the COOK TIME and BROIL
HI/LO pads again at the same time.
The display will show C (Celsius).
Press the START pad.
NOTE: On double oven models, the new setting
will be displayed for both ovens.