Gateway L110 - Manual (Page 56)

2-39
Software Installation and Operation
Select file path and name to be created and click “Next”. Default file path and name are
“My Document” and “URGFSerialNumber.txt” respectively.
The unregistration process is completed. Please send the file created to the registration
center or agent. Serial number can be reused later only if registration is cancelled by the
registration center or agent using file created. Click “Finish”.
“Off Line – Cancel Registration” Option
This option is used when unregistering using “Off Line - Registration via File / E-mail” option
and before receiving registration key from registration center or agent. Note that after
completing this option, registration can not be done again using document created with “Off
Line - Registration via File / E-mail” option. Therefore, “Off Line - Registration via File / E-mail”
option should be completed and the file created thus should be sent to the registration center or
agent again for re-registration.
Select “Off Line -Cancel Registration” option and click “Next”.