Gateway L110 User Manual

Page 36

2-19

Software Installation and Operation

In the “Network” tab, check "Use Static IP address" and input IP and Gateway address

as below. (For example, IP address is 192.168.0.1 and Subnet mask is 255.255.255.0.

According to Host PC's configuration, the IP address should be different)

In the “TS Options” tab, input the Terminal

Server Network address as below. (Terminal

Server Network address : 192.168.000.001)

*only use this address if it follows your IP

addressing scheme.

If you have finished the settings, click “Save”

then click “Connect”.

Your OfficeStation terminal should be connected to the Host PC. You are now ready to use your OfficeStation terminal.

Turn on the OfficeStation terminal for configuation

settings. Click the “Setup”.