Grundig DUO GRP6000 - Manual (Page 39)

2 Select the desired value (»Original«, »96 kHz« or »48 kHz« with » " « or
» ! « and confirm with » OK «.
– Use »Original« for DVDs with a 96 kHz sound signal.
The sound signal is output at the »
AUDIO OUT L R « sockets and – if
supported by the DVD – at the » DIGITAL AUDIO OUT « socket.
– Use »96 kHz« for DVDs with a 96 kHz sound signal for optimum analogue
sound output at the »
AUDIO OUT L R « sockets. No sound signal at the
» DIGITAL AUDIO OUT « socket.
– Use »48kHz« for DVDs with a 48 kHz sound signal.
The signal is output at the »
AUDIO OUT L R « socket and at the » DIGITAL
AUDIO OUT « socket. 96 kHz sound signal is converted into 48 kHz.
Setting the digital output level
With this setting, the output level can be adapted to the volume of other external
sound sources.
1 Select »Output level« and press » OK «.
2 Change the output level (from »0dB« to »20 dB«) with » " « or » ! «, or with
» # « and » $ « in 10 steps, and press » OK « to confirm.
3 Press » « to quit the menu.
39
USING EXTERNAL DRIVES DISC MODE
Original
Clock rate
96 kHz
48 kHz
● Back ● Quit
Output format
Digital
Bits
Clock rate
Output level
● Back ● Quit
24
Original
0 dB