Grundig DUO GRP6000 - Manual (Page 37)

Connecting to a digital multi-channel amplifier
The digital multi-channel sound of a DVD can best be decoded and played with
a multi-channel audio/video amplifier (Dolby*digital decoder or DTS).
1 Plug a standard phono cable into the » DIGITAL AUDIO OUT « socket of the
Receiver/Player and into the appropriate socket on the digital multi-channel
amplifier.
* Manufactured under license from Dolby Laboratories Licensing Corporation.”Dolby”, “Dolby
Pro Logic”, “AC 3” and the double-D symbol “ “ are trademarks of the Dolby Laboratories
Licensing Corporation. Copyright 1992 Dolby Laboratories, Inc. All rights reserved.
Connecting to a HiFi system with digital two-channel
stereo sound (PCM)
1 Plug a standard phono cable into the » DIGITAL AUDIO OUT « sockets on
the receiver-player and into the appropriate sockets on the HiFi system.
Note:
The correct digital output format must be set on the Receiver/Player. For this,
you must observe the settings in the “Adapting the digital output to a digital
multi-channel amplifier”.
37
USING EXTERNAL DEVICES
DISC MODE
VIDEO OUT
S-VIDEO
VCR
TV
RF IN
RF OUT - 1
RF OUT - 2
9V DC
50mA max
AERIAL IN
LOOP
THROUGH
MADE IN U.K.
220-240 V
50/60 Hz 25 W
AUDIO OUT
DIGITAL
L
R
VIDEO OUT
S-VIDEO
VCR
TV
RF IN
RF OUT - 1
RF OUT - 2
9V DC
50mA max
AERIAL IN
LOOP
THROUGH
MADE IN U.K.
220-240 V
50/60 Hz 25 W
AUDIO OUT
DIGITAL
L
R