Advanced set-up, Tv mode, Connecting a 2nd tv and optional 2nd handset – Grundig DUO GRP6000 User Manual
Page 13: Pin number
13
Connecting a 2nd TV and optional 2nd handset
If you wish you can connect a second TV to the Receiver/Player. This allows the
second TV to view either the DVD picture or the Digital TV signal from a different
room. If you purchase the optional
External Infrared Receiver Kit
you can
also control the Receiver/Player from the second room.
1
Press » «, select »
SETUP
« menu and press »
OK
«.
2
Select »
RF Modulator Setup
« and press »
OK
«.
3
Now choose if you wish the RF outputs enabled using »
#
«/»
$
« to select
»
ON
« (picture available on 2nd TV) or »
OFF
« (picture on 2nd TV switched
OFF)
4
Now choose if you wish to enable the
External IR
for control from a 2nd
room. Use »
#
«/»
$
« to select »
ON
« or »
OFF
«.
5
You can adjust the channel of the
RF modulator
to avoid any interference
from other TV channels. Choose a channel between 21 and 69 using
»
#
«/»
$
«.
6
Choose the output standard for the RF modulator. Use »
#
«/»
$
« to choose
between »
PAL-I
« for the UK or »
PAL-G
« for the rest of Europe.
7
To aid RF tuning, the Receiver/Player has a built in »
Test Pattern
«. Use
»
#
«/»
$
« to turn it »
ON
« or »
OFF
«. The test card is two vertical white bars
on a black background.
PIN number
You can choose a PIN (Personal Identification Number) for use with parental
controls. The receiver was originally programmed with 1234. It is recommended
that you change this for your own number.
1
Press » «, select »
SETUP
« menu and press »
OK
«.
2
Select »
PARENTAL CONTROL
« and press »
OK
«.
3
Now enter the current PIN ****. (1234 if this is your first change).
4
Select »
CHANGE PIN
« and press »
OK
«.
5
Use »
0..9
« to enter a new PIN.
6
Use »
0..9
« to confirm new PIN. When confirmed, this number is now stored.
KEEP THIS NUMBER SAFE!
7
To exit menu press »
«.
ADVANCED SET-UP
TV MODE