Grizzly G1071 - Manual (Page 4)

-2-
model g1071 (mfg. 1/02+)
INTRODuCTION
We stand behind our machines. if you have any
service questions, parts requests or general ques-
tions about the machine, please call or write us at
the location listed below.
grizzly industrial, inc.
1203 lycoming mall Circle
muncy, pa 17756
phone: (570) 546-9663
fax: (800) 438-5901
e-mail: [email protected]
if you have any comments regarding this manual,
please write to us at the address below:
grizzly industrial, inc.
C /
o
technical documentation manager
p.o. Box 2069
Bellingham, Wa 98227-2069
email: [email protected]
Contact Info
an oscillating spindle sander is used to sand
the edges of contoured or irregularly shaped
workpieces.
the cast-iron sanding table provides a solid plat-
form for supporting workpieces and can tilt for
sanding beveled edges.
the integrated dust collection port can be fitted to
a dust collection system to reduce the amount of
dust released by the machine.
sanding sleeves are easily replaceable and avail-
able in a variety of sizes and grits.
Machine Description
Manual Accuracy
We are proud to offer this manual with your new
machine! We've made every effort to be exact
with the instructions, specifications, drawings, and
photographs of the machine we used when writ-
ing this manual. however, sometimes errors do
happen and we apologize for them.
also, owing to our policy of continuous improve-
ment,
your machine may not exactly match the
manual. if you find this to be the case, and the dif-
ference between the manual and machine leaves
you in doubt, check our website for the latest
manual update or call technical support for help.
Before calling, find the manufacture date of your
machine by looking at the date stamped into the
machine id label (see below). this will help us
determine if the manual version you received
matches the manufacture date of your machine.
for your convenience, we post all available man-
uals and manual updates for free on our website
at
www.grizzly.com. any updates to your model
of machine will be reflected in these documents
as soon as they are complete.
manufacture date
of your machine