GE DECT 28861xx2 - Manual (Page 14)

14
Dial Mode
Set the dial mode to TONE or PULSE. The default setting is TONE.
1. Press the
menu button.
. Press the 5 or 6 button to select DIAL MODE and press the menu button again.
3. Press the 5 or 6 button to select TONE or PULSE.
4. Press the menu button to confirm the setting.
5. Press the exit button to return to idle mode.
Date / Time
Set the Date/Time displayed in idle mode. The default setting is “008, 01/01 1:01
pm”.
1. Press the
menu button.
. Press the 5 or 6 button to select DATE/TIME and press the menu button again,
the screen displays Year 2008.
3. Use the number keypad to input the last two digits of year (range: 00-99), press
the menu button to confirm the setting and then enter month and date settings.
4. Input the correct date and month, the format is: month/date (date range:
01-30/31, month range: 01-1, press the menu button to confirm the setting and
enter time setting.
5. Input the correct time, the format is: hour/minute (hour range: 01-1 and 00-3,
minute range: 00-59), and select am, pm, or 4-hour using the 5 or 6 button.
6. Press the menu button to confirm the setting.
7. Press the exit button to return to idle mode.
NOTE: If the value you input is over the range, you cannot enter the
next setting. Please re-enter the correct setting.