Gateway FPD2185W - Manual (Page 15)

Adjusting monitor settings www.gateway.com
11
■ Input
OSD active: Press to move to previous menu.
OSD inactive: Press to select the video source.
■ Auto
OSD active: Press to select a menu or setting.
OSD inactive: Press to automatically optimize the monitor’s image
position, clock, and phase.
■ PIP
OSD active: Press to move up through menu selections and adjust OSD
options.
OSD inactive: Press to turn on PIP (Picture-in-Picture).
■ Swap/PIP menu
OSD active: Press to move down through menu selections and adjust OSD
options.
OSD inactive, PIP on: Press to swap the PIP (Picture-in-Picture) image with
the primary image.
OSD inactive, PIP off: Press to open the PIP (Picture-in-Picture) control
menu.
■ Menu
Press to open the OSD. Press again to exit the OSD.
On-screen display (OSD) options
Adjusting OSD settings
To adjust the OSD settings:
Important
When adjusting the monitor settings,
always press the Auto button before
entering the OSD. This automatically
adjusts the display image to the ideal
settings for the current screen resolution.
For most applications, the best screen
resolution is 1680 × 1050.
1 Press the Auto button. The display image is automatically adjusted to the
ideal settings for your current screen resolution.
2 Press the Menu button. The OSD menu opens.
Main Menu
Select
Previous
Next
Menu Off
Auto
Picture
PIP
Video Adjust
Geometry
Advanced
Reset