Gateway FPD2185W - Manual (Page 11)

Adjusting the stand www.gateway.com
7
Adjusting the stand
Adjusting monitor height tension
The stand is factory adjusted to maintain the adjusted height for your monitor.
However, you can further adjust the tension.
To test and adjust your monitor’s height tension:
1 Move your monitor up and down through its entire vertical range. If it does
not stay in place when you let go, you need to change the adjustable
stand’s height tension. You also need to adjust the stand if the amounts
of force required to raise and lower the monitor are not equal.
Height:
4.12 inches
(105 mm)
Tilt: 35°
Rotation: 90°
Pan: 35°