Watching a tvprogram, Watching a tv program – Gateway 30 inch LCD TV User Manual
Page 15
11
www.gateway.com
Watching a TV program
To watch a TV program, make sure that:
■
Any cable, satellite, or off-air antenna connections are secure.
■
The power cord is plugged into a correctly grounded electrical outlet or surge protector.
To watch a TV program:
1
Press the power button on the front of your LCD TV. The Status LED on the front
turns green.
2
Select
TV
using the
INPUT
button on the front of your LCD TV if you are watching a
cable TV box or off-air antenna.
- OR -
Select
HDTV
using the
INPUT
button on the front of your LCD TV if you are watching
your satellite dish.
You should be able to see a picture. If you do not, make sure that all connections are
secure and you have selected the correct video input source.
3
Press the
CH
and
buttons on the front of your LCD TV to change the channel.
You can also use your remote control to change these settings. For more information, see
your remote control user guide.
To make additional adjustments to your LCD TV, see
“Adjusting Your LCD TV Settings”
.
Important
The CH
and
buttons on the front of the television do not work
if you are watching a program using HDTV input.