GIGABYTE W451U User Manual

Page 34

W451U NOTEBOOK USER’S MANUAL

Connecting to Peripherals

4.1

Using the USB Port

The USB port allows multiple peripherals to run simultaneously on
a single computer. These peripherals may include: ﬂoppy drives,
mouse, digital cameras, scanners, printers, optical disk drive, key-
boards, and games devices...etc. The USB Port can also act as a
hub or as an external workstation.

4.2 Connecting to an External Monitor

via the VGA Port

The notebook comes with a VGA port for you to connect to an
external monitor. To connect an external monitor, please follow the
steps below:
1. Turn off your W451U notebook and make sure the monitor power

switch is turned off.

2. Connect the connector cable of the monitor to the VGA port at

the left-side of your notebook. Secure the cable connection with
the screws provided.

3. Connect the monitor power cable and plug it into a properly

grounded wall outlet.

4. Turn on the monitor.
5. Turn on your W451U notebook. Both the LCD panel and the

monitor screen will show the display. Your notebook is set at de-
fault to run at simultaneous display mode.

6. If you only want to show the display on the external monitor
(CRT/LCD) and shut off the LCD display, you can use the
+ hot-key to switch display type between LCD and

CRT. Keep pressing the hot-key until you get the display to

external CRT/LCD only.