GE MULTILINK ML2400 - Manual (Page 169)

CHAPTER 10: VLAN VLAN
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 10–5
start vlan=
To save VLAN configuration:
save
To edit VLANs:
edit id= [name=] port=
To display the VLAN information:
show vlan type= []
The following command sequence shows how to configure VLANs on a MultiLink switch.
ML2400# vlan type=port
ML2400(port-vlan)## add id=2 name=test port=1-10
ML2400(port-vlan)## start vlan=all
ML2400(port-vlan)## save
Saving current configuration...
Configuration saved
To move Management Control on any VLAN:
add id= [name=] port=
[Forbid=][]
To enable or disable Management Control on any VLAN:
edit id=[name=][port=[]