Optional accessories, Design information, Using duct cover accessories – GE Monogram MONOGRAM ZV950 User Manual
Page 4: Product dimensions and clearances (cont.)

Design Information
4
Using Duct Cover Accessories
A Duct Cover Accessory may be required for your
hood installation height.
Use this chart to determine
installation height and accessory for your ceiling height.
ZV950SDSS Installation Heights
* Based on 36″ countertop height.
The serial plate is located behind the removable filters.
Actual
Ceiling
Height
7′ 11″
8′ 0″
8′ 1″
8′ 2″
8′ 3″
8′ 4″
8′ 5″
8′ 6″
8′ 7″
8′ 8″
8′ 9″
8′ 10″
8′ 11″
9′ 0″
9′ 1″
9′ 2″
9′ 3″
9′ 4″
9′ 5″
9′ 6″
9′ 7″
9′ 8″
9′ 9″
9′ 10″
9′ 11″
10′ 0″
14′ 0″
* Possible Hood
Installation Height
24-1/2″
25-1/2″
25-1/2″ to 26-1/2″
25-1/2″ to 27-1/2″
25-1/2″ to 28-1/2″
25-1/2″ to 29-1/2″
25-1/2″ to 30″
25-1/2″ to 30″
25-1/2″ to 30″
25-1/2″ to 30″
25-1/2″ to 30″
25-1/2″ to 30″
25-1/2″ to 30″
25-1/2″ to 30″
26-1/2″ to 30″
26-1/2″ to 30″
26-1/2″ to 30″
26-1/2″ to 30″
26-1/2″ to 30″
30″ min.
30″ min.
30″ min.
30″ min.
30″ min.
30″ min.
30″ min.
Duct Cover
ZX14SDSS
SUPPLIED
OPTIONAL ACCESSORIES
ZX14SDSS, optional stainless steel duct cover
is available for ceiling heights greater than 10 ft.
and up to 14 ft.
Order the optional duct cover at the same time
as the vent hood and have on site before installation.
Note: Duct covers must be installed as shown in this
book. Do not “build-in” the duct cover. If service
is required, the duct cover must be removed to access
hood components.
PRODUCT DIMENSIONS AND
CLEARANCES (cont.)