Grizzly G0659 - Manual (Page 12)

-10-
g0659 9" x 14" Vertical Metal-Cutting Bandsaw
Wear safety glasses dur-
ing the entire set up pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
SECTION 3: SETUp
The Model G0659 is a
heavy machine. DO NOT
over-exert yourself while
unpacking or moving
your machine—get assis-
tance.
Setup Safety
the Model g0659 was carefully packed when it
left our warehouse. if you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663 for advice.
save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, you should inventory the
contents.
Unpacking
After all parts have been removed from the pack-
aging, you should have the following items:
Main Components: (figure 2) Qty
A. Bandsaw unit (not shown) .......................... 1
B. C-Clamp Vise ............................................. 1
C. round handle ............................................ 1
D. roller Brackets ........................................... 2
E. roller .......................................................... 1
f. Counterweight ............................................ 1
G. Knob 3 ⁄
8
-18 x 2" ........................................... 1
h. lock Washers 5 ⁄
16
" (roller) ........................... 4
I. hex Bolts 5 ⁄
16
-18 x 5 ⁄
8
" (roller) ...................... 4
J. Vise support rod ....................................... 1
K. hex Wrench Kit 1-10mm (not shown) ...1 ea.
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them, or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Inventory
NOTICE
Some components on the inventory list may
arrive pre-installed on the machine. Check
these locations before assuming that any
items from the inventory list are missing.
figure 2. inventory.
B
C
d
e
F
g
h
i J