Gateway DC-M40 - Manual (Page 43)

A D V A N C E D
43
SETTING UP THE SHOOTING FUNCTION
SIZE
• In STILL IMAGE and MACRO SHOT mode, you can select the image size.
• Changing the image size affects the number of images which can be
recorded on the CF card.
2272X1704 1600X1200 640X480
1. Rotate the mode dial to the SHOT mode.
2. Press the MENU button and press the UP ( ) / DOWN
( ) button and select [IMAGE SIZE].
3. Press the RIGHT ( ) button to select the [IMAGE SIZE]
sub menu.
4. Select the desired size by pressing the UP ( ) / DOWN
( ) button. The default is 2272x1704.
5. After selecting the desired size, press the OK button to
confirm the setting.
6. Press the MENU button to cancel the menu display.
STILL IMAGE mode