Fujitsu Siemens Computers LifeBook B6210 - Manual (Page 59)

51
U s e r I n s t a l l a b l e F e a t u r e s
EXTERNAL VIDEO PORT
The external video port allows you to connect an
external monitor or LCD projector. In order to connect
an external device, follow these easy steps: See “LifeBook
notebook rear panel” on page 12.
1. Remove the cover from the port opening, if present.
2. Align the connector with the port opening.
3. Push the connector into the port until it is seated.
4. Tighten the two hold-down screws, located on
each end of the connector.
When a Port Replicator is attached and an
external video device is plugged in,
pressing the [Fn] + [F10] keys allows you
to change your selection of where to send
your display video. Each time you press
the key combination, you will step to the
next choice, starting with the built-in
display panel only, moving to the external
monitor only, finally moving to both the
built-in display panel and an external
monitor.
B Series.book Page 51 Friday, May 19, 2006 3:00 PM