Fujitsu Siemens Computers LifeBook B6210 - Manual (Page 43)

35
G e t t i n g S t a r t e d
3. Click OK. Your notebook will shut down and then
reboot.
POWER OFF
Before turning off the power by choosing Shut Down
from the Windows Start menu, check that the Hard
Drive, PC Card and the Floppy Disk Drive Access indi-
cators are all Off. (See Figure 2-5 on page 8) If you turn
off the power while accessing a disk or PC Card there is a
risk of data loss. To ensure that your notebook shuts
down without error, use the Windows shut down proce-
dure.
Using the correct procedure to shut down from
Windows, allows your notebook to complete its opera-
tions and turn off power in the proper sequence to avoid
errors. The proper sequence is:
1. Click the Start button, and then click Shut Down.
2. Select the Shut Down option from the dropdown
list.
If you are going to store your notebook for a month or
more see the Care and Maintenance section.
Turning off your LifeBook notebook
without exiting Windows or turning on
your notebook within 10 seconds of the
notebook being shut off may cause an
error when you start the next time.
Be sure to close all files, exit all
applications, and shut down your
operating system prior to turning off the
power. If files are open when you turn off
power, you will lose any changes that
have not been saved, and may cause disk
errors.
B Series.book Page 35 Friday, May 19, 2006 3:00 PM